Roof & Structural Protection — Ghana Engineering Advisory

Roof Waterproofing & Leak Repair Solutions in Ghana

Stop Roof Leaks with Industrial-Grade Waterproofing Membranes

Bottom Line Up Front (BLUF) Answer

To stop roof leaks and waterproof concrete flat roofs or metal sheets in Ghana, use a high-build elastomeric polyurethane liquid waterproofing membrane reinforced with polyester scrim. Prodeal Industries Ltd in Accra supplies industrial-grade, UV-resistant waterproofing chemicals with same-day dispatch and technical support across Ghana.

Key Engineering Takeaway: Liquid polyurethane-modified elastomeric membranes provide a seamless, monolithic seal that withstands tropical UV radiation and expands over settling micro-cracks without cracking.

Root Cause Analysis

Why Standard Methods Fail in Ghana’s Climate

01.

Ponding water on flat concrete slabs due to poor slope gradients.

02.

Hairline shrinkage cracks on concrete roofs expanding under intense tropical solar heat.

03.

Corrosion and fastener screw-hole leaks on corrugated metal sheets.

04.

Degradation of traditional bituminous felt from high UV exposure.

Chemical Formulations & Dosage

Certified Solutions from Prodeal Industries

Browse Full Chemical Catalog →
Polyurethane Elastomeric CoatingIndustrial Grade

Pro-Elastoseal Liquid Membrane

High-solids elastomeric liquid polymer with UV stabilizers

Target Surface:Concrete flat roofs, parapet walls, screed slabs
Estimated Coverage:1.5 kg - 2.0 kg / m² (2-3 coats)
Curing / Recoat Time:4-6 hours recoat, 24 hours full cure
Key Technical Advantages:
400% elongation bridges micro-cracks
UV and ponding water resistant
Monolithic seamless application
Reinforced Solar-Reflective CoatingIndustrial Grade

Pro-RoofGuard Acrylic Waterproofing

Cross-linking pure acrylic with thermal reflective pigments

Target Surface:Corrugated metal sheets, asbestos tiles, zinc roofs
Estimated Coverage:1.2 kg - 1.5 kg / m²
Curing / Recoat Time:2-4 hours per coat
Key Technical Advantages:
Reduces indoor building temperature
Prevents rust and fastener leakage
Water-based and non-toxic

Applicator Instructions

Step-by-Step Professional Application Guide

1

Surface Cleaning & Preparation

Remove all moss, algae, dirt, and loose debris using a wire brush or pressure washer. Ensure the substrate is dry, stable, and dust-free.

2

Crack Repair & Primer Application

V-groove and seal existing cracks greater than 1mm with polyurethane mastic sealant. Apply a deep-penetrating primer coat diluted 10% with clean water.

3

Apply Base Coat & Reinforcing Mesh

Apply the first liberal coat of liquid membrane and embed non-woven polyester reinforcing geotextile scrim over joints, corners, and parapets while wet.

4

Apply Cross-Directional Top Coats

Apply the second and third coats perpendicular to the previous coat after 4 hours drying time, ensuring full encapsulation of the membrane.

— Common Questions

FAQ

3 questions

The most durable solution for concrete roof slabs in Ghana is a liquid elastomeric polyurethane waterproofing membrane reinforced with geotextile fabric. It creates a seamless rubber barrier resistant to torrential rainfall and intense tropical UV.

Yes, but you must first treat rusted areas with a rust converter, seal all loose screw fasteners and overlaps with polyurethane sealant, and apply a solar-reflective acrylic elastomeric waterproof coating.

Prodeal Industries Ltd supplies wholesale and contractor-grade roof waterproofing chemicals directly from Accra with rapid dispatch across Greater Accra, Tema, Kumasi, and nationwide.

Explore Other Technical Solutions